KitchenPro Service logoKitchenPro
Call Book a service
Philips DOME-1.5 LTR with Gasket HL7756 — mixer grinder spare part
DOME-1.5 LTR with Gasket HL7756 view 2DOME-1.5 LTR with Gasket HL7756 view 3
Philips

Philips DOME-1.5 LTR with Gasket HL7756

₹115

Price includes GST. No re-quote once the appliance is open.

● In stock in Bengaluru — most repairs close within 12 hours
Verified
technicians
Price agreed
upfront
Done within
12 hours
You sign off
before billing

Will it fit?

  • Listed for Philips mixer grinders.
  • Size stated as 1.5 litre — check it against the part you are replacing.
  • Mixer jars and couplers are model-specific. If you are not sure which one fits, send a photo of the mixer on WhatsApp and we will identify the part before you pay for it.

Send a photo on WhatsApp and we will confirm →

Product details

BrandPhilips
FitsMixer Grinder
Part typeCoupler
Capacity1.5 litre
Part number996510076339
HSN code85099000
AvailabilityIn stock in Bangalore

About this part

Suitable For: Philips HL7756 series mixer grinders — HL7756/00, HL7756/01 and comparable variants 1.5 litre wet grinding / main jar position Replacement for a leaking jar base, a cracked or worn dome, or a hardened, flattened or torn gasket Supplied as a matched dome and gasket set 1.5 L jar size — the 1 L and 0.5 L jars take different domes Replacement blade dome with gasket for the 1.5 litre jar of the Philips HL7756 mixer grinder. The dome is the housing that holds the blade shaft at the base of the jar; the gasket is the rubber seal that sits between the dome and the jar base and keeps liquid inside. Supplied together as a set so the seal and the seating face are matched — no mixing a new dome with a hardened old gasket. The 1.5 litre jar is the wet grinding jar, used for idli and dosa batter, coconut chutney, gravies, purées, juices, shakes and large-quantity masalas. Its dome takes the heaviest and wettest load of any jar on the machine. Replace the set when liquid seeps from the base of the jar during or after grinding, when you find wet residue under the jar, when the dome is cracked, corroded or the blade wobbles in it, or when the gasket has gone hard, flat, sticky or torn.

The coupler is the rubber or nylon drive piece between the motor shaft and the jar. It is meant to fail before the motor does, so it is the first thing to check when a jar spins slowly or slips.

Also called

The same part goes by several names. If you searched for any of these, you are in the right place.

  • Dome with gasket
  • Dome 1.5 litre
  • Dome 1.5 ltr
  • Dome 1.5 litre with gasket
  • 1.5 litre dome
  • Mixer dome
  • Mixer grinder dome
  • Mixie dome
  • Blade dome
  • Blade housing

Rather we fitted it?

Book a mixer grinder visit and the technician brings this part with them, so the repair finishes in one trip. You see the visit price before you confirm.

Mixer Grinder repair in Bangalore — prices and what is included →

Philips DOME-1.5 LTR with Gasket HL7756 — questions we get asked

How much is the DOME-1.5 LTR with Gasket HL7756?

₹115, and that is what you pay — the amount is restated before you confirm and nobody re-prices it after opening the appliance. Fitting, if you want it, is quoted separately and agreed first.

Will it fit my mixer grinder?

Mixer jars and couplers are model-specific. If you are not sure which one fits, send a photo of the mixer on WhatsApp and we will identify the part before you pay for it. WhatsApp a photo of the appliance and of the failed part, and we will confirm the match before you pay for anything.

Do I have to book a technician to buy it?

No — buy the coupler on its own if you are confident fitting it. If you would rather not, book a mixer grinder visit and the technician arrives with it, so the repair finishes in one trip.

How soon can I have it in Bangalore?

It is in stock in Bengaluru. Parts we hold locally usually reach a job the same day, and most repairs booked against them close within 12 hours across the city.

Does the 1.5 litre size matter?

Yes. This one is listed at 1.5 litre, and on a mixer grinder the size is what decides whether it seats properly. Check the figure on your existing part before ordering.

Can I get a GST invoice?

Yes. This part invoices under HSN 85099000, and a GST invoice is raised for the order — which is what a technician or a dealer buying for a workshop needs.

₹115In stock in Bengaluru
Buy in the app