Philips Dome Gasket 0.5 L
Price includes GST. No re-quote once the appliance is open.
● In stock in Bengaluru — most repairs close within 12 hourstechnicians
upfront
12 hours
before billing
Will it fit?
- Listed for Philips mixer grinders.
- Size stated as 0.5 litre — check it against the part you are replacing.
- Mixer jars and couplers are model-specific. If you are not sure which one fits, send a photo of the mixer on WhatsApp and we will identify the part before you pay for it.
Product details
| Brand | Philips |
|---|---|
| Fits | Mixer Grinder |
| Part type | Coupler |
| Capacity | 0.5 litre |
| Part number | 996510080531 |
| HSN code | 40169340 |
| Availability | In stock in Bangalore |
About this part
Suitable For: Philips mixer grinders — 0.5 litre chutney / small jar position Dome (blade housing) gasket position — the seal that sits between the blade dome and the jar base Replacement for a leaking chutney jar, a hardened or flattened gasket, or a torn or cracked seal Fits the 0.5 L small jar; the 1 L and 1.5 L jars take different gasket sizes Replacement dome gasket for the 0.5 litre chutney jar of Philips mixer grinders. This is the rubber ring that seals the blade dome against the jar base — a small part, but the one thing standing between your chutney and a leak all over the motor unit. Replace it when liquid seeps from the base of the jar during or after grinding, when you find wet residue under the jar after use, when the gasket has gone hard, flattened, cracked or sticky, or whenever you refit the blade assembly after cleaning or blade replacement. Gaskets are a routine wear part — heat, oil and repeated tightening harden the rubber over time. A leaking gasket is not just a mess. Liquid reaching the coupler and motor unit causes coupler wear, bearing damage and, in the worst case, motor failure — which is why replacing a small seal early saves an expensive repair later. Food-grade, heat- and oil-resistant rubber that keeps its elasticity through daily grinding of chutneys, masalas, ginger-garlic paste and wet batters. Precision-moulded profile matched to the original so it seats flush and compresses evenly under the dome nut for a proper leak-proof seal.
The coupler is the rubber or nylon drive piece between the motor shaft and the jar. It is meant to fail before the motor does, so it is the first thing to check when a jar spins slowly or slips.
Also called
The same part goes by several names. If you searched for any of these, you are in the right place.
- Dome gasket 0.5
- Dome gasket 0.5 L
- Dome gasket 0.5 litre
- Dome gasket half litre
- Gasket 0.5 litre
- Mixer dome gasket
- Mixer grinder dome gasket
- Mixie dome gasket
- Jar gasket
- Mixer jar gasket
Rather we fitted it?
Book a mixer grinder visit and the technician brings this part with them, so the repair finishes in one trip. You see the visit price before you confirm.
Mixer Grinder repair in Bangalore — prices and what is included →
Philips Dome Gasket 0.5 L — questions we get asked
How much is the Dome Gasket 0.5 L?
₹35, and that is what you pay — the amount is restated before you confirm and nobody re-prices it after opening the appliance. Fitting, if you want it, is quoted separately and agreed first.
Will it fit my mixer grinder?
Mixer jars and couplers are model-specific. If you are not sure which one fits, send a photo of the mixer on WhatsApp and we will identify the part before you pay for it. WhatsApp a photo of the appliance and of the failed part, and we will confirm the match before you pay for anything.
Do I have to book a technician to buy it?
No — buy the coupler on its own if you are confident fitting it. If you would rather not, book a mixer grinder visit and the technician arrives with it, so the repair finishes in one trip.
How soon can I have it in Bangalore?
It is in stock in Bengaluru. Parts we hold locally usually reach a job the same day, and most repairs booked against them close within 12 hours across the city.
Does the 0.5 litre size matter?
Yes. This one is listed at 0.5 litre, and on a mixer grinder the size is what decides whether it seats properly. Check the figure on your existing part before ordering.
Can I get a GST invoice?
Yes. This part invoices under HSN 40169340, and a GST invoice is raised for the order — which is what a technician or a dealer buying for a workshop needs.
Similar parts
Other Philips parts and close alternatives.
